Specifications

3)VP-216

Step 9 : Power On and Install Firmware

After complete hardware installation, you can power on the PC as usual and follow the procedure below

for firmware installation:

1. Before install Firmware, enter BIOS first and select First boot device to CD-ROM. After boot up your

system, you will see as follow:

2. DVR INSTALL

3. Select a disk to install.

HDS722540VLAT20(hda)

HDS722540VLAT20(hdb)

USE: UP , Down , Enter , ESC

Note: If user has two Hard Disks, you can choose to install Firmware to the hard disk you want.

4. Press enter -> Format disk hda (Y/N)? Y

->Installing files

->The installation has finished

->Press any key to reboot.

Note: After system reboot, please remove CD from CD-ROM otherwise firmware will ask you to install

again.

5. After installing Firmware, Live videos should be displayed on VGA screen if everything is OK.

6. Click Setup button on the right panel to show setup menu .Select the System Info function in the

menu to display the system information such as disk size or firmware information .

7. If you want to install more Hard disk to your DVR system, you can remove the CD-ROM and install

2*Hard disks on primary IDE.

8. When you power on the DVR system, please enter BIOS first and select “First boot device” hard disk

which you selected to install firmware.

I/O card (VP-IO84)

Daughter board

Video capture card

(VP-216)

Audio card