Instruction manual

A-12

MS-6580 ATX Mainboard

Using the Back Panel only

In addition to a default 2-channel analog audio output function, the

audio connectors on the Back Panel also provide 4- or 6-channel analog audio

output function if a proper setting is made in the software utility.

Read the following steps to have the Multi-Channel Audio Function

properly set in the software utility, and have your speakers correctly connected

to the Back Panel.

Configuration in the Software Utility

1. Click the audio icon from the window tray at the lower-right

corner of the screen.

2. Select a desired surround sound effect from the “Environment”

drop-down menu.

3. Click the Speaker Configuration tab.

4. Select Synchronize the phone jack switch with the settings.

5. Select a desired multi-channel operation from No. of Speakers.

a. 2-Channel Mode for Stereo-Speaker Output

b. 4-Channel Mode for 4-Speaker Output

c. 6-Channels Mode for 5.1-Speaker Output

6. Click OK to close this window.