Instruction manual

Installing ATA133 RAID Driver
B-1
Appendix. Using 4- or 6-Channel
Audio Function
Appendix B: Installing ATA133 RAID
Driver
The motherboard comes with optional ATA133 RAID connector, which
provides support for high-end Ultra ATA133 RAID (0 or 1) hard drive interface
specifications. This section provides the ATA133 RAID driver installation
procedure when used with various operating systems.
If you have purchased an MBUltra133 for your existing PC, you will
have to install the appropriate driver for your current operating system.
If you own a PC with an existing MBUltra133 card, drivers were
already installed with the system. You would only need to re-install drivers
when re-installing an operating system or installing an updated driver.
TOPICS
Installing Drivers B-2