Instruction manual

Using 4- or 6-Channel Audio Function

A-15

Digital Audio Output (2-Channel only)

For digital audio output, use the SPDIF (Sony & Philips Digital Interface)

connectors supplied by S-Bracket. First, connect the SPDIF speakers to the

appropriate SPDIF jack, and then select the audio channel you desire through

the control panel of speakers. The SPDIF connectors support 2-channel audio

operation only.

S-Bracket offers two types of SPDIF jacks: one for fiber-optic cable and

the other for coaxial cable. Select the connector according to the type of your

SPDIF speakers.

6-Channel Analog Audio Output

Description:

Connect two speakers to back panel’s Line Out

connector and four speakers to both Line Out

connectors of S-Bracket.

1 Line Out (Front channels)

2 Line In

3 MIC

4 Optical SPDIF jack

5 Coaxial SPDIF jack

6 Line Out (Center and Subwoofer channel)

7 Line Out (Rear channels)

S-Bracket

Back Panel