Instruction manual

3-25
BIOS Setup
Onboard FDC
This is used to enable or disable the onboard Floppy controller.
Onboard Serial Port A
These items specify the base I/O port addresses of the onboard Serial Port 1
(COM A)/Serial Port 2 (COM B). Selecting Auto allows AMIBIOS to auto-
matically determine the correct base I/O port address. Settings: Auto, 3F8/
COM1, 2F8/COM2, 3E8/COM3, 2E8/COM4 and Disabled.
Serial Port B Mode
This item sets the operation mode for Serial Port B. Settings: Normal,
1.6uS, 3/16 Baud and ASKIR (the last three operation modes are
settingoptions for IR function).
IR Pin Select
Set to IRRX/IRTX when using an internal IR module connected to the
IR connector. Set to SINB/SOUTB. when connecting an IR adapter to
COM B.
Option Description
Auto BIOS will automatically determine whether to enable the
onboard Floppy controller or not.
Enabled Enables the onboard Floppy controller.
Disabled Disables the onboard Floppy controller.