Instruction manual

3-18
KT3 Ultra2-C ATX Mainboard
845PE Max2 ATX Mainboard
Set Monitor Events
Press <Enter> and the following sub-menu appears.
FDC/LPT/COM Ports, Primary/Secondary Master/Slave IDE
These items specify if the BIOS wil monitor the activity of the specified
hardware peripherals or components. If set to Monitor, any activity de-
tected on the specified hareware peripherals or components will wake up
the system or prevent the system from entering the power saving modes.
Settings: Monitor, Ignore.
Set WakeUp Events
Press <Enter> and the following sub-menu appears.
Resume On Ring, Resume On PME#
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected. Settings: Enabled, Disabled.