Instruction manual

2-22
KT3 Ultra2-C ATX Mainboard
845PE Max2 ATX Mainboard845PE Max2 ATX Mainboard
Fan Power Connectors: C_FAN1/S_FAN1/PWR_FAN1
The C_FAN1 (processor fan), S_FAN1 (system fan) and PWR_FAN1
(power fan) support system cooling fan with +12V. It supports three-pin head
connector. When connecting the wire to the connectors, always take note that
the red wire is the positive and should be connected to the +12V, the black
wire is Ground and should be connected to GND. If the mainboard has a
System Hardware Monitor chipset on-board, you must use a specially de-
signed fan with speed sensor to take advantage of the CPU fan control.
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. C_FAN1 supports the fan control. You can install the PC
Alert utility that will automatically control the CPU fan speed
according to the actual CPU temperature.
C_FAN1
SENSOR
+12V
GND
PWR_FAN1
+12V
GND
SENSOR
S_FAN1
SENSOR
+12V
GND