Instruction manual

Installing ATA133 RAID Driver
B-9
has found a “PCI Mass Storage Controller.”
3. Click on “Next,” and from the generated list box, choose “Specify the
location of the driver (Advanced).”
4. Click on “Next,” and from the generated choices, choose “Specify a
location.”
5. Insert the “MBUltra133 Driver” diskette in drive A:.
6. Type “A:\WIN9X-ME” in the text box that appears.
7. Click on “Next.” A message informing you that Windows Me/98 has
found “Win9x-ME Promise MBUltra133 IDE Controller” should
appear.
8. Click on “Next,” and then on “Finish.”
9. Choose “Yes” when asked if you want to restart your computer. Be
sure to eject the diskette from drive A:.
Confirming Driver Installation in Windows Me/98
To confirm that the driver has been properly loaded in Windows Me/98, per-
form the following steps:
1. Choose “Settings” from the “Start” menu.
2. Choose “Control Panel,” and then double-click on the “System” icon.
3. Choose the “Device Manager” tab, and then click the “+” in front of
“SCSI & RAID controllers.” “Win9x-ME Promise MBUltra133 IDE
Controller” should appear.