User`s manual

Chapter 4 Using the System
72
Click button to split the screen into a 16-Cam split display.
The system will display all cameras as the above picture.
4.1.2 Using Full Screen Display
On the Monitor Screen, you can click
to switch to a full screen display.
You will see the system turning to a full-size display. To monitor a specific channel, move the
cursor to the desired channel and click the left button to switch it to full screen. Click it again to
return to the multi-display mode. Right click to return to the Monitor Screen.
4.1.3 Using Auto Scan
Click
on the Monitor Screen to enable “Auto Scan”. The system will cycle the channels
according to the split display mode in sequence.
When the quantities of enabled cameras are more than the split screens, the split screens will
cycle different batches of cameras. Please refer to 4.2.3 Changing the Split Display Mode