User`s manual

AVerMedia DX5300 / DX5500 User’s Manual
71
Click to split the screen into a 4-Cam split display.
When the quantities of enabled cameras are more than the split screens, the system will show
different batches of cameras under 4-Cam split display mode. For instance, if you enabled 16
cameras and select a 4-Cam split display mode, the batches of display will be Camera 1 - 4,
Camera 5-8 and so on as the above illustration.
If you only have 4 cameras connected, the 6-Cam/9-Cam/13-Cam/16-Cam split display modes
will be disabled automatically.
8-Cam Split Display
Click
to split the screen into a 8-Cam split display.
The system will display the first batch of cameras, Camera 1 to Camera 8, and then turns to
the next batch of cameras, Camera 2 to Camera 9 and so on. The above picture illustrates the
sequences of 8-Cam split display.
9-Cam Split Display
Click
to split the screen into a 9-Cam split display.
Click this button to split the screen into a 9-Cam display. The screen will first display the
Camera 1~9. Clicking it again changes the display to camera 5~13. Further clicking will
change the display to Cameras 9~1, 13~5, 1~9, and so on. See the following sequence.
16-Cam Split Display