User`s manual

Chapter 3 Configuring the System
64
disk.
Click Network Device button, and the
system will appear a dialog box to request
for the backup path.
Assign a directory path for backup.
When you can use “Backup HDD”,you must assign at least one hard
disk as a backup disk.
3. Reboot: When you select “Reboot” as a schedule task, the system will automatically
set a reboot time to reboot once weekly to maintain a better performance. You can
arrange the system reboot schedule to allow the system automatically reboot everyday or
once a week according to your request. When the time is due, the system will reboot
according to the settings here. To maintain a better performance, the system reboots
itself automatically once a week. The default schedule is 12:00 AM every Sunday.
4.Alarm: In this task, users can assign when to activated the alarm or not. For instance,
users can disable the alarm in daytime and enable the function in nighttime to prevent
accidentally unnecessary alarm trigger. Choose the desired alarm button and set the time.
When the time is due, the alarm will be activated according to the settings here and in the
Alarm setup.
5. Network: You can setup the limited time periods to allow inbound connections by
setting Schedule Network. The system allows inbound connections during appointed
periods of time depending on the allowed schedule. The default setting is “Select all”.
Please enable inbound connections when you use Remote Manager to connect to the
server. If you did not set Schedule Network, inbound connections from Remote Manager
will fail.
6. Shutdown: You can set the shutdown schedule by setting schedule shutdown. When
the time is due, the system will automatically shut down the system.
B. Create a time schedule