User`s manual

AVerMedia DX5300 / DX5500 User’s Manual
61
Recording Camera: Assign your desired cameras to record video automatically when an
event has been detected.
Post-alarm frame number: Post-alarm recording allows video recording to continue after an
alarm situation has ended. Set the number of frames to be continuously recorded after an
alarm situation has ended.
Relay On: There are three relays at most for one IO card. Select at least one relay to retrieve
from.
Relay retrieve within: Set the amount of time that the relay will retrieve.
Phone alarm and Email will be activated after: Phone alarm and Email alarm will be
activated according to the time you set after relay is acted.
Press Email alarm button to enable phone dial-up and dispatching of Email messages when
the alarm is triggered. Click the Email setting button to specify the Email message content.
You will see the following dialog.
Press the button to enter the account and password if it is necessary. Click OK to finish the
settings. Click OK to clear all or Cancel to cancel the settings.
Press the Phone alarm setting button to enable phone dial-up and dispatching of Email
messages. Enter up to two phone numbers in the blanks behind Telephone1 No. and
Telephone2 No..
Wave file: Choose an audio file that contains a voice message to be used as the Phone
alarm message.