User`s manual

AVerMedia DX5300 / DX5500 User’s Manual

B. Network Service

Enable RemoteView server via TCP/IP: Select this option to enable the RemoteView server

via TCP/IP. Set the TCP/IP server port (default is 9090) and select the desired Camera No. to

connect to.

Enable WebCam: Select this option to enable the WebCam feature. Set the HTTP server

port (default is 80) and select the desired camera to connect to.

Enable dynamic DNS: If your system uses a dynamic IP address, please go to

http://www.ddns.avers.com.tw to register its domain name and password first. Select this

item and enter the proper domain name and password to enable dynamic DNS. If you enable

this function without entering the domain name and the password, the system will show an

error message. For details, see Appendix A.

Camera No.: You can decide which cameras can be remotely monitored via Webcam. For

instance, you can let users to monitor limited channels via remote monitoring by selecting

different transmitting cameras. You can also click “all” button to select all camera numbers, or

click desired camera numbers respectively.

Enable ADSL: If your are using PPPoE to connect the Internet, select this item and enter your

ADSL ID and password. If your system connects to the Internet through a fixed-IP ADSL

service, please ignore this item but enter your IP address, Netmask, Gateway, Host name

and DNS manually.

Modem COM port: Choose the COM port you use for the modem.