User`s manual

AVerMedia DX5300 / DX5500 User’s Manual

you can click Apply ALL button to apply the same recording type settings to

all cameras.

B. Recording Type

Choose one of these methods of recording:

Display only

: The system only monitors and does not perform video recording.

Continuous recording : The system records images from the selected cameras 24/7.

Motion detection recording

: The system will start recording when movement is detected.

You can adjust the camera’s motion Sensitivity (default is 60%). Larger values represent

higher sensitivity.

Smart Recording

: The system records the maximum available frame rate when the

movement is detected. When the system detects no movement, it will record at the speed of 2

FPS to help to save the hard disk space. The system default setting is Smart Recording.

After selecting a recording type, select the recording time on the time bar. When you click the

desired time, the block color changes. Each color block represents the recording type in the

assigned period of time.

Select a recording type and click

to mark all the same recording type.

C. Recording

Pre-recording frame number: This value is the number of frames to be recorded before the

system commences recording.

Post-recording ___ sec.: The value is the recording time after motion detection.