User`s manual

Chapter 3 Configuring the System
48
C. Camera Name
Enter a name for this camera. The maximum for a camera name is 32 bytes.
D. Image Property Settings
You can adjust image property settings, including Brightness, Contrast, Saturation, and Hue
in Image property column. Drag the scroll right or left to a proper Brightness, Contrast,
Saturation and Hue. For your convenience, the system provides 2 default color settings. Click
Default 1 or Default 2 button for a proper image setting.
E. PTZ Camera Settings
If you are using a PTZ camera, please select the PTZ camera type from the Vendor drop-
down list, and the COM port, assign the Port address.
Choose a preset number from the drop-down list to set the monitoring position.
According to your demands, set the Dwell time. This is the amount time that the PTZ camera
stays at a position before moving to the next position. Set up the Dwell time for the camera to
stay (1~60 seconds) at one position before rotating to the next position. Determine a Preset
Name for the position. If the Dwell time is shorter than 3 seconds, some cameras may not
have enough react time.
The 16 preset positions are divided into 4 groups, Group 1 (1-4), Group (5-8), Group (9-12)
and Group (13-16). You can select the groups that you want.
When you setup the PTZ cameras, please avoid to set chennel 1,5,9, and 13
as PTZ cameras.