User`s manual

Chapter 3 Configuring the System
42
D. Setting Operator1-Operator 6
For remote surveillance settings, root can setup 6 operator users (operator 1 – operator 6) and
assign the display cameras and recording cameras that an authorized operator can access
and monitor from a remote client. Set the User name. Click display number buttons to allow
the cameras can be remote monitored. When you click display number buttons, the lower
recording number buttons will be enabled. Click the recording buttons if you permit the
operator to record the channels from a remote client. By confining channels that different
operators can monitor, root can control the surveillance rights of operators.
If you want to change the password, please enter a new password in blank and confirm
password again.
To configure the settings of operator1-operator6, switch to a desired tab. Select the desired
display channels and recording channels. Enter the password and then confirm it again. Click
Save to keep the settings.