User`s manual

Chapter 3 Configuring the System
36
B. Frame rate setting
The numbers 1-16 right to the scroll bars indicate the camera numbers. Select
to set
all cameras the same frame rate settings.
Recording frame rate: Set the display frame rate by dragging the scroll bar. The level
is from 1 to 30. The number will vary according to connected cameras. If you only have
4-8 channels, you can set the frame rate to 30. The maximum number for one DX 5300
system is 120.The maximum number for one DX 5500 system is 240. For one DX 5500
system with 16 channels, the maximum frame rate will be 15 (240÷16＝15).The higher
the level, the faster the recording rate will be. For instance, the lower information,
, shows the total frame rate of the DX 5300. For one DX5500
with 8 channels, the maximum frame rate will be 30 (240÷8＝30). This means the total
recording frame can range from 1-30.This setting ONLY apply to “Motion Recording”
and “Continuous Recording” modes.
Key frame interval: Set the recording frame rate by entering a number or clicking
to adjust to a desired number. The default level setting is 30.The level is from 1 to 60.