User`s manual

AVerMedia DX5300 / DX5500 User’s Manual
5
6. Please insert one DOM cable connector to
IDE0 slot on the motherboard. Insert the
DOM to the middle slot of the cable as the
right picture.
If you have a CD-ROM or a burner, you
can insert the other connector of DOM
cable to your CD-ROM or your burner.
Please adjust the jumpers on CD-ROM
to slave.
7. Install the DOM as the IDE primary
master and connect the power
connector as the following picture
marked. Make sure the switch of the
DOM is “M”. Confirm the DOM
installation.
8. Put the computer cover back and
reconnect all cables to the computer. The
right picture illustrates the back panel of
the Video Capture cards.