User`s manual

AVerMedia DX5300 / DX5500 User’s Manual
111
specified time schedule. (To have all cameras included during recording, select the
All check box.)
Click Add to create the time schedule. Repeat the above steps to create more
schedules.
When you have finished creating time schedules, click OK to save them, or click
Cancel to remove the configurations.
Once recording has been set on a time schedule, the recording status can be viewed
in the Channel Status field.
G. Network Setup
If you want to transmit images for remote surveillance via TCP/IP, first click this button to
open the following dialog box.
A. Determine a UDP port (default 9190) to receive images from the server.
B. Select a TCP port to use for connecting to the server via Auto assignment, or
specify at least 32 ports at a range from 1025 to 65535 for transferring images and
receiving commands.
C. Click OK to save the settings, or click Cancel to quit the dialog box without saving
the settings.
The following shows a detailed illustration on configuring the connection: