User`s manual

Chapter 5 Using Remote Program
94
10. Auto pan path group. After setting up Preset position numbers from the server,
you can enable the auto pan path group function according to your demands
from the client. Click
, and you will find the PTZ camera lens cycles to the
desired positions and stays for the appointed time that you setup from the server.
11. Preset position numbers. Users can appoint Preset positions of the PTZ
camera lens from the server. 16 Preset position numbers are the maximum for a
PTZ camera. Click the Preset position numbers to make the lens move to the
desired positions.
12. Position status bar. It shows the current position that the camera is monitoring.
13. Download Remote Manager. Chick
to download Remote Manager
application. The DVR system provides an online Remote Manager download
service to make the download easier via Internet. When you click
, the
system will request a storage path. Assign a desired storage path to download
the application. After finishing the download, you can install the Remote Manager
application.
14. Voice Phone. The system provides a 2-way audio function to enable ONE
WebCam user to have a free talk with ONE server user each time by using
microphone via Intranet or Internet. Thus, a remote client PC user and the DVR
user can talk to each other directly by microphone via network. Click
to
enable voice phone. To disable this function, click it again. Before using voice
phone, please make sure both the speakers and microphones of your
client PC and server are working properly.
5.2 Installing Remote Manager
Before using the Remote Manager, please install Remote Manager. The Remote Manager
software allows you to manage DVR server from a client computer almost the same as if you
were working from the server console.
There are 2 ways to install Remote Manager. You can download the Remote Manager
application online by click
on WebCam screen. You can also insert the software CD in
the CD-ROM to install the application.
Follow the steps below to install the Remote Manager software.
1. Place the software CD in the CD-ROM
drive. It auto-runs.