User`s manual

Chapter 5 Using Remote Program

5.1.1 Using WebCam Controller

Here is the introduction of functional buttons of the WebCam controller.

1. Split display mode. The system provides 4 split display modes: 1- Cam display,

4-Cam split display, 9-Cam split display and 16-Cam split display. If you only

connect 4 cameras, the 9-Cam and 16-Cam split display will be disabled

automatically.

2. Select cameras to view. Click

to enter Channel Monitor Screen. Click

to enable or

to disable the channel on Display column. The camera names

are set in server’s settings.