User`s manual

AVerMedia DX5300 / DX5500 User’s Manual
89
Chapter 5 Using Remote Program
Before you use WebCam, please make sure that this function is enabled. Click and
then switch to Network tab. For more information to set the network, please refer to 3.6
Setting the Network.
Make sure that remote access service is enabled before you open IE. Enter the server’s IP
address or its domain name,which are mentioned in 3.6 Network Setting to remote access
the surveillance system from anywhere.
When you connect the server, the following screen will pop up. Click Yes to allow the SSL
authentication. SSL provides services between SSL-enabled browsers and SSL-enabled
servers. The SSL authentication is released by AVERMEDIA. AVERMEDIA guaranteed that