User guide

For this reason, if adding on an operator position to an existing system (R2.0 thru 2.4.1) and the new iButtons (R2.5 or
greater) are ordered, an upgrade to the latest release (R2.7) software is required. First upgrade the system, then
connect the add-on operator position.
INSTRUCTIONS ON ORDERING iBUTTONS FOR NEW MCC 5500 SYSTEMS OR ADDING ON TO FIELDED MCC
5500 CONSOLE (R2.5 or greater):
Ordering iButtons for a brand new
MCC 5500 Dispatch Console system (R2.5 or greater) - below are the iButton
options that are available to order with either L3550 or L3551:
Ordering SPARE iButtons - below are the R2.5 or greater (New) iButton Spares that are used with either L3550 or
L3551
INSTRUCTIONS ON ORDERING PRE
-R2.5 i-BUTTONS FOR FIELDED MCC 5500 DISPATCH CONSOLE FOR
PAST RELEASES (R2.0 thru 2.4.1):
If the fielded MCC 5500 Dispatch Console System is pre-Release 2.5 (R2.0 thru R2.4.1) than below are the steps that
need to taken to add additional DAPs to the fielded system without having to upgrade the system to the latest release
(R2.7).
1. Order the DAP II Module - Two different DAP modules are available depending on whether or not the customer
uses DC-Control
 L3550 - DAP II Module for Non-DC Control
 L3551 - DAP II Module for DC Control --- requires option TT04090AA
2. Order the PreR2.5 iButtons Spares from AAD - see part #'s below
2 Analog Channels
with License
TT05247AA
2 SB9600 Channels
with License
TT05248AA
2 ASTRO Channels
with License
TT05249AA
2 iDEN Channels with
License
TT05245AA
2 Analog Channels
with License
DDN9679
2 SB9600 Channels
with License
DDN9680
2 ASTRO Channels
with License
DDN9681
2 iDEN Channels with
License
DDN9658
2 Analog Channels with
License
DDN7933
2 SB9600 Channels
Pa
g
e 9 of 16Dispatch Solutions \ MCC 5500 Dispatch Console
2/17/2015mk:
@
MSITStore:C:\Users\case02\Documents\ECAT
_
DUP
_
Feb
_
2015\ECAT.chm::/MCC5500.
...