User guide

In addition there will be the ability to support 6-wire T22R and 10-wire T44R configurations.
iDEN signaling was introduced in MCC 5500 Release 2.5. The MCC 5500 Console can connect to a public iDEN
network via a connection to an iDEN control station (i325 or i365IS radio) via direct connect cables. Please see the
Product Planner and Ordering Requirements below for more details.
BASE STATION KEYING: TRC, relay, DC (hardware option) ASTRO and Digital (SB9600) keying of channels are
available. For TRC, Guard Tone levels and frequencies are configurable. For DC the current for each function is
configurable, as is the type of control - pulsed or latched current.
TELEPHONY: MCC 5500 supports connection to external analog, loop-start POTS lines with Caller-ID. Also available
are Flash Hook, Hold, and assisted transfer between Operator positions.
GENERAL: Channel Marker and three different Alert tones are available. There is the ability to have a configurable
Talk-Extend time after the Alert Tone has been sent. If the channel that the Channel Marker or Alert Tones are being
sent out on is part of an active patch, all channels within the patch will transmit the Channel Marker or Alert Tone.
For Radio resources parallel status will be maintained among the Operator positions for frequency, PL, repeater
ON/OFF, Repeat-Through-Console, Wild Cards I/II, and common I/Os. Main/Standby (2w and 4w) via relays is
supported, as is Main/Alternate.
MCC 5500 RELEASE 2.7
- NEW FEATURES / ENHANCEMENTS:
 APX 7500 Consolette with ACIM link support of 255 modes / frequencies - increased the number of supported
modes / frequencies from 16 to 255 when connected to an APX 7500 Consolette via ACIM link.
 APX Mobile in Tray (O5 Control Head, Remote Mount) using SB9600 - virtual control head support of the APX
7500 Mobile in a tray (O5 Control Head, Remote Mount) using SB9600, similar to the digital interface between the MCC
5500 and the XTL 5000 W9 Consolette. The MCC 5500 Dispatch Console mimics the APX 7500 Mobile (O5 Control
Head, Remote Mount) and the keypad microphone..
 Multi-Touch Monitor Support - on Window 7 (32-bit) and Windows 8 OS. .
 Microsoft Windows 8 OS (64-bit) Support - in addition to Windows 7 Professional SP1 (32-bit) OS.
 Support for New Docking Format - R2.7 now supports docking windows framework that provides a user with
Supervisor access with more flexibility in setting up how the dispatch console user workspace is composed and
displayed to the dispatch console user.
 For more information on the MCC 5500 Release 2.7 features, please refer to the MCC 5500 Product Planner.
PLEASE NOTE:
A
D
M
: The ADM application post Release 2.5 is no longer dependent on the Microsoft SQL Server or MSDE to manage
Type # TX
# TX Frequency
# RX #RX Frequency NOTES
R1 0 0 1 1
Receive Only
T1R1 1 1 1 1
T2R2 1 2 1 2
2 Frequency Station
T4R4 1 4 1 4
4 Frequency Station
T8R8 1 8 1 8
8 Frequency Station
T12R12 1 12 1 12
12 Frequency Station
T14R14 1 14 1 14
14 Frequency Station
T16R16 1 16 1 16
16 Frequency Station
T22R 1 2 2 1 per RX
T44R 1 4 4 1 per RX
Requires 8 wires minimum
Pa
g
e 5 of 16Dispatch Solutions \ MCC 5500 Dispatch Console
2/17/2015mk:
@
MSITStore:C:\Users\case02\Documents\ECAT
_
DUP
_
Feb
_
2015\ECAT.chm::/MCC5500.
...