Owner's Manual

2-18
MS-9188 Server Board
Jumpers
Clear CMOS Jumper: JBAT1
There is a CMOS RAM onboard that has a power supply from external battery to keep
the data of system configuration. With the CMOS RAM, the system can automatically
boot OS every time it is turned on. If you want to clear the system configuration, set
the JBAT1 (Clear CMOS Jumper ) to clear data.
Important
You can clear CMOS by shorting 2-3 pin while the system is off. Then return
to 1-2 pin position. Avoid clearing the CMOS while the system is on; it will
damage the mainboard.
BIOS Recovery Jumper: J8
Users can short connect pin#2-3 to recover the system BIOS with a Recovery
Floppy. When the system is done with the job, the buzzer will beep to remind the user
to set the jumper to its normal state (pin#1-2 short connected).
Normal
1
3
Recovery
1
3
J8
13
Clear Data
1
3
Keep Data
1
3
JBAT1
1
9188v1.0-2.p65 2009/2/11, 下午 04:5018
PDF created with pdfFactory Pro trial version www.pdffactory.com