Owner's Manual

2-17
Hardware Setup
SFP LAN LED Connector: JLANLED1
This connector is designed to connect an LED module for optical SFP LAN ports.
JLANLED1
20
2
19
1
PIN SIGNAL
1 3.3V
2 LAN1_ACT#
3 3.3V
4 LAN1_LINK_UP#
5 3.3V
6 LAN2_ACT#
7 3.3V
8 LAN2_LINK_UP#
9 3.3V
10 LAN3_ACT#
11 3.3V
12 LAN3_LINK_UP#
13 3.3V
14 LAN4_ACT#
15 3.3V
16 LAN4_LINK_UP#
17 3.3V
18 RELAY1_EN#
19 3.3V
20 RELAY2_EN#
Pin Definition
SFP LAN LED Module
(Optional)
Description
(1) LAN1_LINK_UP# glows (orange): the fiber has linked.
(2) LAN1_ACT# blinks (GREEN): the fiber has transferred date.
(3) LAN2_LINK_UP# glows (orange): the fiber has linked.
(4) LAN2_ACT# blinks (GREEN): the fiber has transferred date.
(5) LAN3_LINK_UP# glows (orange): the fiber has linked.
(6) LAN3_ACT# blinks (GREEN): the fiber has transferred date.
(7) LAN4_LINK_UP# glows (orange): the fiber has linked.
(8) LAN4_ACT# blinks (GREEN): the fiber has transferred date.
(9) When RELAY1_EN# is enabled, the LED1 will be dark; when RELAY1_EN# is disabled, the LED1 will glow.
(10)When RELAY2_EN# is enabled, the LED2 will be dark; when RELAY2_EN# is disabled, the LED2 will glow.
9188v1.0-2.p65 2009/2/11, 下午 04:5017
PDF created with pdfFactory Pro trial version www.pdffactory.com