Owner's Manual
2-10
MS-9188 Server Board
Connectors
44-Pin IDE Connector: IDE1
This 44-pin IDE connector connects to an optional converter that enables connection
to one 44-pin IDE device and one 40-pin IDE device, such as hard disk drives, CD-
ROM and other IDE devices.
Connect to IDE1
Connect to 40-pin
IDE device
Connect to 44-pin
IDE device
IDE1
Important
If you install two IDE devices on the same cable, you must configure the
drives separately to master / slave mode by setting jumpers. Refer to IDE
deviceβs documentation supplied by the vendors for jumper setting
instructions.
9188v1.0-2.p65 2009/2/11, δΈε 04:5010
PDF created with pdfFactory Pro trial version www.pdffactory.com