MSD 6430 6ALN Ignition Control Compatibility list : User guide : Page 2

7 a.m. - 5 p.m. MST

MSD 5/ MSD 6- 7AL-2, 7AL-3 DIGITAL-7

BLASTER SERIES SERIES SERIES

* The factory coil from any vehicle that has a 12 volt negative ground electrical system and has a ballast resistor or

resistance wiring in the original ignition key wire will work with the MSD.

NOTE: For MSD 8-Series Ignitions use Pro Power Coil, P N 8201, Pro Power HVC, 8251, or Pro Power HVC II, PN 8261.

HELPFUL COIL INFORMATION

A ballast resistor is not necessary with any MSD Series Ignition but can be left in-line if originally equipped.

The MSD Blaster Coils and any other oil-ﬁlled, canister style coils should be mounted so that the high voltage coil

tower is pointed upward. Also, mount the coil so the coil wire is as short as possible to keep resistance low.

Use of any coil that is not compatible may damage the MSD and void the warranty.

Caution: Coils that have an internal power transistor are NOT compatible with MSD Ignition Controls. These are gener-

ally found on late model DIS or coil-per-cylinder ignitions. Check with MSD if you have any questions before

installing an MSD Ignition Control.

Ford TFI Coil YES YES YES NO

Ford OEM 12V Coil* YES YES YES NO

GM Transistor NO NO NO NO

GM HEI Coil NO YES YES NO

GM OEM 12V Coil YES YES YES NO

Mallory 28880 NO NO YES NO

Mallory 29212 HEI-Low rpm YES YES YES NO

Mallory 29213 Ford TFI Low rpm YES YES YES NO

Mallory 29214 YES YES YES NO

Mallory 29215 YES YES YES NO

Mallory 29216 YES YES YES NO

Mallory 28675 YES YES NO NO

Mallory 28720 YES YES NO NO

Mallory 29150 YES YES YES NO

Mallory 29217 YES YES YES NO

Mallory 29440 NO YES YES NO

Mallory 29620 YES YES NO NO

Mallory 29625 YES YES NO NO

Mallory 29901 NO NO YES NO

Mallory Super Mag 28900 NO NO NO NO

Moroso 72350 YES YES YES NO

Moroso 72380 YES NO NO NO

Moroso 72381 NO YES YES NO

Nology 151991500 NO NO NO NO

Nology 151991600 NO NO NO NO

Nology 15199170 YES YES NO NO

Nology 151991750 YES YES NO NO

Nology 151991800 NO NO NO NO

Pertronix Flame-Thrower 40,000 Volt Canister Coil YES YES YES NO

Pertronix Flame-Thrower 45,000 Volt Canister Coil YES YES YES NO

Pertronix Flame-Thrower 50,000 Volt E-Core Coil NO YES YES NO

Pertronix Flame-Thrower HV 60,000 Volt Coil NO NO NO NO

Any foreign or domestic 12V Coil* YES YES YES NO

M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4

FRM30885 Revised 12/11 Printed in U.S.A.