Installation Manual

INSTALLATION INSTRUCTIONS 7
MSD • WWW.ATOMICEFI.COM • [phone] • FAX [phone]
Throttle Position (TPS) Sensor: The kit has a connector on each rail for the TPS sensor. It must be
plugged into the driver side rail. The kit only supports a cable driven throttle body at this time
and includes an adapter harness for the TPS sensor used on a cable driven throttle body.
Wide Band O2 Sensor: A wide band O2 sensor is supplied with the kit. The O2 sensor is used by
the ECU to monitor air/fuel ratios (AFR) in the exhaust gases. Adjustments are made by the
ECU in closed loop to maintain (AFR).