Owners manual

4 INSTALLATION INSTRUCTIONS
MSD • WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]
SPRING COMBINATION RATE OF ADVANCE GRAPH NO. (Page 3)
2- Heavy Silver SLOWEST A
1- Heavy Silver B
1- Light Blue
1-Heavy Silver C
1-Light Silver
2- Light Blue D
1- Light Silver E
1- Light Blue
2- Light Silver FASTEST F
Figure 3 Spring Combination Chart.
INSTALLING THE ADVANCE SPRINGS
1. Remove the distributor cap and rotor.
2.Usinglongneedlenosepliers,removethespringsfromthespringposts.
3. Install the new springs using the pliers and install the rotor and cap.
SELECTING THE ADVANCE STOP BUSHING
Five different advance stop bushings are supplied in the distributor kit. The distributor comes with a
Blue (10.5 ) bushing already installed. If a different amount of centrifugal advance is desired, follow
the next procedure to change the bushings. The chart in Figure 4 gives the size and approximate
degrees for the corresponding bushings.
Figure 4 Advance Stop Bushing Chart.
BUSHING SIZE APPROXIMATE
CRANKSHAFT
DEGREES
Red-Smallest 28
Silver 25
Green 23
Blue 21
Purple 19
Black-Largest 18