Owners manual

INSTALLATION INSTRUCTIONS 3
MSD • WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]
will give you the slowest advance curve possible (Figure 2). The parts kit contains two additional sets
of springs which can be used to match the advance curve to your particular application. Refer to the
Spring Combination Chart (Figure 3) for combinations that can be achieved.
To change the springs, remove the cap and rotor and use needlenose pliers to remove the springs.
Be sure the new springs seat in the groove on the pin.
RED
RED
RED
SILVER
GREEN
BLUE
PURPLE
BLACK
SILVER
GREEN
BLUE
PURPLE
BLACK
SILVER
GREEN
BLUE
PURPLE
BLACK
SILVER
GREEN
BLUE
PURPLE
BLACK
SILVER
GREEN
BLUE
PURPLE
BLACK
SILVER
GREEN
BLUE
PURPLE
BLACK
RED
RED
RED
ADVANCED
STOP BUSHING
ADVANCED
STOP BUSHING
ADVANCED
STOP BUSHING
ADVANCED
STOP BUSHING
ADVANCED
STOP BUSHING
ADVANCED
STOP BUSHING
Figure 2 The Factory Equipped Curve.
Timing Curve From Factory
Figure 3 Spring Combination Chart.
Figure 4 Advance Curves.
SPRING COMBINATION RATE OF ADVANCE FIGURE 4
2- Heavy Silver SLOWEST A
1- Heavy Silver B
1- Light Blue
1-Heavy Silver C
1-Light Silver
2- Light Blue D
1- Light Silver E
1- Light Blue
2- Light Silver FASTEST F