Owners manual

INSTALLATION INSTRUCTIONS 7
MSD • WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]
Figure 13 Wiring the Ready-to-Run Ford Distributor.
GRAY TO
TACH INPUT
GRAY TO
TACH INPUT
Figure 14 Connecting an MSD Ignition Control.
RED
ORANGE
BLACK
TO COIL POSITIVE + 12 VOLTS
TO COIL NEGATIVE
-
TO ENGINE GROUND
NOTE: THE READY-TO-RUN DISTRIBUTORS DO NOT
REQUIRE AN MSD IGNITION, THOUGH THEY CAN
BE USED WITH ONE.