Owners manual

INSTALLATION INSTRUCTIONS 7
MSD • WWW.MSDPERFORMANCE.COM • [phone] • FAX [phone]
Figure 5 Wiring the Programmable 6AL-2 with an ECU Trigger.
MAGNETIC PICKUP
(NOT USED)
INDICATES CONNECTION
•
TO ECU TRIGGER OUTPUT
(LOW VOLTAGE/LOW CURRENT)
MENU - SELECT ECU
GREEN
VIOLET
+
HEAVY RED
HEAVY BLACK
TO BATTERY
TO BATTERY
+
ORANGE (TO COIL +)
BLACK (TO COIL -)
WHITE
AMPLIFIER/POINTS
(NOT USED)
IGNITION KEY
TO 12V
RED
PINK
DARK BLUE
LIGHT BLUE
WHITE/BLUE
LAUNCH
(12V TO ACTIVATE)
BURNOUT
(12V TO ACTIVATE)
RETARD
(12V TO ACTIVATE)
GRAY
TACH OUTPUT
MAP
SENSOR
RED
NOTES: MUST BE USED WITH A
DISTRIBUTOR.
MENU SELECTION
MUST BE "ECU".
Figure 9 Wiring the Programmable 6AL-2 with a Ford TFI (without Harness).
WHITE
MAGNETIC PICKUP
(NOT USED)
INDICATES CONNECTION
•
GREEN
VIOLET
HEAVY RED
HEAVY BLACK
TO BATTERY
TO BATTERY
+
ORANGE (TO COIL +)
BLACK (TO COIL -)
RED
PINK
DARK BLUE
LIGHT BLUE
WHITE/BLUE
HALL-EFFECT
(NOT USED)
LAUNCH
(12V TO ACTIVATE)
BURNOUT
(12V TO ACTIVATE)
RETARD
(12V TO ACTIVATE)
GRAY
TACH OUTPUT
MAP
SENSOR
RED
•
•
RED/LIGHT GREEN
DARK GREEN/YELLOW
FACTORY
COIL WIRES
NOTE: MSD offers a Direct Plug-in
Harness, PN 8874.