Owners manual

MONITORS AND GAUGES
The pane on the right side of the MSD View window allows users to see a variety of engine parameters in
real time. The top of the pane shows selected items in either list or gauge form. The bottom of the pane
lists all available items to be checked for monitoring. When the engine is running, users can watch changes
occur as they are entered into the software.
TABLE FEATURES
To edit the data in the table users can select a single cell at a time or select a group of cells to all be
changed to the same value. To change timing or fuel data in a table the sign (+/-) of the new number
designates what type of change occurs. Use a negative dash (-) immediately before a number to retard
timing or decrease fuel supply. No positive sign (+) is required when entering a number to advance timing
or increase fuel supply. When a cell or group of cells is highlighted, use the keyboard to enter the desired
number. When a new value is being entered, the Up and Down keyboard arrows will change the entered
value by one value, respectively. To finish a change, click in a new cell or press enter.
Data can be copied and pasted from one table to another. To do so, copy the required cells using Edit on the
Menu Bar, right click in the highlighted area, or use Ctrl + C on the keyboard. Copied data can be pasted
in any table. The data will paste in the cells that correspond to those from which it was originally copied.
MSD POWERSPORTS • WWW.MSDPOWERSPORTS.COM • [phone] • FAX [phone]
© 2012 Autotronic Controls Corporation
FRM30222 Revised 02/12 Printed in U.S.A.
Limited Warranty
M SD warrants this product to be free from defects in material and workmanship under its intended normal use*,
when properly installed and purchased from an authorized MSD dealer, for a period of one year from the date of
the original purchase. This warranty is void for any products purchased through auction websites. If found to be
defective as mentioned above, it will be repaired or replaced at the option of MSD. Any item that is covered under
this warranty will be returned free of charge using Ground shipping methods.
This shall constitute the sole remedy of the purchaser and the sole liability of MSD. To the extent permitted by
law, the foregoing is exclusive and in lieu of all other warranties or representation whether expressed or implied,
including any implied warranty of merchantability or fitness. In no event shall MSD or its suppliers be liable for special
or consequential damages.
*Intended normal use means that this item is being used as was originally intended and for the original application
as sold by MSD. Any modifications to this item or if it is used on an application other than what MSD markets the
product, the warranty will be void. It is the sole responsibility of the customer to determine that this item will work for
the application they are intending. MSD will accept no liability for custom applications.
Service
In case of malfunction, this MSD component will be repaired free of charge according to the terms of the warranty.
When returning MSD components for warranty service, Proof of Purchase must be supplied for verification. After
the warranty period has expired, repair service is based on a minimum and maximum fee.
All returns must have a Return Material Authorization (RMA) number issued to them before
being returned. To obtain an RMA number please contact MSD Customer Service at 1 (888) MSD-7859 or visit
our website at www.msdperformance.com/rma to automatically obtain a number and shipping information.
When returning the unit for repair, leave all wires at the length in which you have them installed. Be sure to include
a detailed account of any problems experienced, and what components and accessories are installed on the vehicle.
The repaired unit will be returned as soon as possible using Ground shipping methods (ground shipping is covered
by warranty). For more information, call MSD at [phone]. MSD technicians are available from 7:00 a.m. to
5:00 p.m. Monday - Friday (mountain time).