The 8.5mm Super Conductor wire is the best wire you can run on your engine whether it’s a cruiser, sport compact or all-out race car. With less than 50 ohms per foot resistance, you can ensure that the most spark energy possible reaches the spark plug gap. More spark energy means improved combustion resulting in increased performance! Even with its low resistance, the Super Conductor Wire suppresses Electro Magnetic Interference (EMI) like a high resistance factory wire.
Custom Sets MSD’s custom wire sets are made to pull out of the box and install on your engine. Many late model wire sets feature factory style boots and terminals for a perfect fit. More wire sets are constantly added so if you don’t see your application contact our customer service department. Year Description Part # PART # BLACK RED Chevrolet 1998-2000 V6 Vortech, 4.3L............................................................ 32833 1971-1974 307, 327, 350, Cars/Trucks.........................
Pro-Clamp Separators Pro-Crimp Tool The best wire separators available! The wires are clamped into place and no tools are required to open the clamps. Supplied with; 2-four wires, 4-three wires, 4-two wires. A hardened steel frame sports comfortable molded hand grips while a slick ratchet action provides secure factory style crimps consistently. The Tool is supplied with crimp/strip jaws for MSD’s 8.5mm Dual Crimp Terminals only.
8.5mm Super Conductor Wire: Installing Terminals Due to the increased size of the 8.5mm spiral wound conductor, it is important to use care not to cut into the conductor. Cutting into the conductor will affect the voltage carrying capabilities of the wire and extra caution should be taken if you are not using the MSD Mini-Stripper Crimper. As you cut the outer sleeve of the wire it is not necessary to cut completely through the insulator to the conductor.
11 Spark Plug Wires and Spark Plugs Spark Plug Wires Spark plug wires have two main objectives; transfer the spark energy to the plugs and suppress the Electro Magnetic Interference (EMI) that the spark voltage projects. Too high of resistance decreases the spark energy, yet too low of resistance may generate too much EMI noise which will interfere with the operation of other electronics on the vehicle.
