Troubleshooting guide

internal ash memory that can be used for persistent storage. There are also two USB ports on the player that can accept a USB

drive to be used as the persistent storage. The choices are:

• Internal Flash – Use the internal ash memory for persistent storage.

• USB Drive – Use a USB drive for persistent storage. To meet the specication for BD-Live, a USB ash drive of 1GB or larger

is required. A USB hard drive is not recommended.

NOTE: The new storage device choice becomes effective only after the player is restarted. Please make sure that you turn off the player

and then turn it back on after changing the “Storage Device” option.

• Space Used – Displays the used space of the persistent storage. If too much space is used and the available space becomes too

low, some Blu-ray Discs may not play properly.

• Erase Persistent Storage – Erases the BD-Video data from the persistent storage or initializes a USB drive so it can be used for

persistent storage.

13. Netix: To de-activate your Netix account. The available options are:

• Netix ESN – To display the Netix ESN (Electronic Serial Number) for your player.

• De-activate Netix – To de-activate the access to your Netix account from your player. Once de-activated, you have to go to

the Home menu, enter the Netix option and go through the activation procedure again to be able to access Netix from your

player.

14. VUDU: Allows you to de-activate your VUDU HD Movies account.

15. Reset Factory Defaults: To reset all settings to the factory default value. This operation also set BD-Live Network Access to be Off

and performs Erase Persistent Storage. However, the remote control code will not be reset. This operation is only available when

the playback is completely stopped or when there is no disc loaded.

NOTE: If all goes wrong do a reset to factory settings, Then go to SETUP: and make the following changes:

1. PLAYBACK SETUP: SACD PRIORITY and select STEREO.

2. AUDIO FORMAT SETUP: HDMI AUDIO: OFF

3. AUDIO PROCESSING: SPEAKER CONFIGURATION: and set CENTER to OFF.