Troubleshooting guide

24
Device Setup
The “Device Setup” section of the Setup
Menu system allows you to configure
additional player options related to the
hardware and control functions. The menu
items in this section are:
1. Firmware Information: To display the
currently installed OPPO rmware
version.
2. Firmware Upgrade: Now this can
be a little bit confusing. There are
two sets of firmware in the UMT.
MSB has based our transport on the
OPPO 103 player and the rmware
is deliberately compatible so you can
get updates from OPPO as soon as
they are available. There is also MSB
rmware in the UMT. Update les are
available from the MSB web site.
3. OPPO Firmware Upgrade Procedure:
This operation is only available when the playback is completely stopped or when there is no disc loaded. The rmware is the system
software that controls the features and functions of the player. Since the Blu-ray Disc specications are new and evolving, it is possible
that a Blu-ray disc manufactured after the player was manufactured uses certain new features of the Blu-ray Disc specications.
To ensure the best possible viewing experience, the player may need a rmware update from time to time. Please visit the OPPO
Digital web site www.oppodigital.com to check for rmware updates and instructions on installing the updates. There are three ways
to upgrade the player’s rmware. The options are:
• Via USB – You may download the rmware les from the OPPO Digital web site to a USB drive and then use the USB drive
to upgrade the player. Please follow the instructions on the rmware download web page.
• Via Disc – You may request a rmware upgrade disc from OPPO Digital or download a disc image from the OPPO Digital web
site and burn an upgrade disc. Please follow the instructions that come with the upgrade disc.
• Via Network – If the player has a working Internet connection (see page 18 and 75), you may upgrade the player directly over
the Internet. Please follow the instructions on your TV screen.
Note: It is very important that after you do a Oppo Firmware upgrade that you Reset to Factory Settings following the instructions in this
manual. The rmware update leaves all settings in an unknown position. You must update.
4. MSB Firmware Upgrade Procedure: This operation is only available when the playback is completely stopped or when there is no
disc loaded. The rmware is the system software that controls the digital audio processing of the player. To ensure the best possible
listening experience, the player may need a rmware update from time to time. Please visit the MSB Technology web site www.
msbtech.com to check for rmware updates and instructions on installing the updates. There are two ways to upgrade the player’s
rmware. You can check the current rmware version by counting how many times the clock link LED blinks RED when turning
the UMT on from the standby mode. Check the web site for the current version. The options for upgrade are:
• Via USB – You may download the rmware les from the MSB web site to a USB drive and then use the USB drive to upgrade
the player. Please follow the instructions on the rmware download web page.
• Via Disc – You may request a rmware upgrade disc from MSB or download a disc image from the MSB web site and burn an
upgrade disc. Please follow the instructions that come with the upgrade disc.
5. OPPO Firmware Notication: To set whether the player should automatically check if new rmware versions are available on the
Internet server and notify the user about new rmware. The options are:
• On – Check for new rmware version automatically and notify the user about new rmware. Requires a working network
connection.
• Off – Do not check for new rmware version automatically.
6. Remote Control Code: The UMT can respond to one of 4 sets of remote control codes. The default is “Code 1”. If you have other
products placed close to the UMT, the other products may respond to the UMT remote control. In this case you can select a different
remote code to avoid conicts. The available codes are:
• Code 1 – UMT remote code set 1. This is the default remote code.
• Code 2 – UMT remote code set 2. Use this code if you have other products placed close to the UMT that share the same codes.
• Code 3 – UMT remote code set 3. Use this code if Code 2 did not solve your problem.