User manual

3
A/V Connection
Connect the mini-plug of the provided A/V cables to the A/V jack on the
rear of the transmitter; connect the other end of the cables to the A/V
jacks (or Scart connector) of the A/V component labeled LINE OUT.
See Fig. 4.
RF Connection – for A/V Component without Spare A/V
Output Jacks
If your A/V component has only one set of A/V output jacks, and you
want to use it with a nearby TV, connect coaxial cable from the signal
OUT port on the A/V component to the VHF/UHF IN port on your TV.
In order to also view cable transmission on that TV, connect your
incoming cable TV source to the single IN port of the A/V component.
Please see Fig. 5.
Transmitter
VIDEO AUDIO
A/V Cable
Satellite receiver/DVD/VCD
Fig.
4
OUT
(Red to red, white to
white, and yellow to
yellow)