Specifications

HDC-1801 HD Downconverter & DA with Analog Monitoring Output
Guide to Installation and Operation
Page 6 of 17 HDC-1801
[GREEN / YELLOW / RED
/ FLASH RED]
[NONE
/ GPI]
[GREEN / YELLOW / RED
/ FLASH RED]
[NONE
/ GPI]
[GREEN / YELLOW
/ RED / FLASH RED]
[NONE
/ GPI]
[GREEN / YELLOW
/ RED / FLASH RED]
[NONE
/ GPI]
[GREEN / YELLOW / RED / FLASH RED]
[NONE
/ GPI]
[GREEN / YELLOW
/ RED / FLASH RED]
[NONE
/ GPI]
HDC-1801:XXX.XXX
[XXXXXXXX]**
[YYYYYYYY]**
RESTORE
Returns all parameter values to those underlined in this chart
ALARM REPORT
ALARM LEVELDA ONLY MODE
ALARM REPORT
ALARM LEVELNO TC
ALARM REPORT
ALARM LEVELTEST
ALARM REPORT
ALARM LEVELNO AUDIO GRP 1
Available only on card
with Audio option
(repeat for Audio
Groups 2, 3 and 4)
ALARM REPORT
ALARM LEVELNO CC/ WSS
(available for all input
formats except 625)
OPTION** AUDIO PROC OFF/ON
LINE SCOPE OFF/ON
VERSION
FACTORY DEFAULT**
(32 bit value in hexadecimal format for each option license)
CONFIG ALARM**
ALARM REPORT
ALARM LEVELNO SIGNAL
NOTES FOR THE MENU:
 [ ] List of parameter values to select
 ** Press Select pushbutton to activate selection.
 Underlined values are Factory Default values