Specifications

HDC-1801 HD Downconverter & DA with Analog Monitoring Output
Guide to Installation and Operation
Page 14 of 17 HDC-1801
Options
Audio Option
Activate the Audio option on the HDC-1801 card by
entering the activation key into the Enter Key data
box, and clicking the Enable Option button.
The current status of the Audio option is shown in
the status box below the Enter Key data box.
See the text message at the top of the tab for
information about purchasing the Audio option and
obtaining the activation key.
IP Scope Option
The IP Scope option adds a line scope output to the
HDC-1801. This output can be viewed on a standard
PC using the iControl Streaming Player, which
shows waveform monitor and vectorscope displays.
Activate the IP Scope option on the HDC-1801 card
by entering the activation key into the Enter Key
data box, and clicking the Enable Option button.
The current status of the IP Scope option is shown in
the status box below the Enter Key data box.
See the text message at the top of the tab for
information about purchasing the IP Scope option
and obtaining the activation key.
Waveform Monitor and Vectorscope
Enable: Click on the checkbox to turn the IP Scope
output ON.
Line: Use the slider or type in the data box to select
the video line that will be used by the line scope. The
current selection is shown in the data box.
Refresh Rate: choose how often the line scope
display will be refreshed. Options are 1 sec to 10
sec, and Fast.