Technical data

MSA AUER
MSA
Use
EVOLUTION 6000 Thermal Imaging Camera
31
US
3.11 Battery Charging
Truck Mounted Charger
The MSA EVOLUTION 6000 Series Truck Mounted Charger provides for simultaneous charging
of the battery in the camera and a spare battery.
- Charge status indication for the battery in the camera displays on the camera's front panel. See
the Charging Indicator section of the manual (chapter 3.4 for details).
- Charge status indication for the spare battery is located on the Truck Mounted Charger. See
table in this section.
To charge the battery while in the camera:
To charge the spare battery:
(1) Insert the battery into the spare battery charging slot.
(2) Ensure that the charge indicator lights when the battery is inserted.
A fully depleted battery recharges in the truck mounted charger in approximately 4 hours.
WARNING
Do not charge the batteries in a hazardous location or an explosive atmosphere.
(1) Place the camera in the truck mounted charger.
 Ensure that the handle is firmly inserted into the
retainer.
 Ensure that the camera is aligned properly to
ensure a good charging connection.
(2) Pull the camera retainer up and over the camera so
that it rests on the display.
Indication Status
Red light Battery is charging
Green light Charging is complete
Flashing red light Error has occurred