Accessories & Apps

PLEASE READ CAREFULLY AND FOLLOW

THE INSTRUCTIONS BELOW:

F1 3/8”

3/8”

F2 3/4”

3/4”

Select the No-VAC

QUICK CONNECT

LINE SET size to be lengthened (⅜ or ¾).

Then select the second standard line set with corresponding speciﬁcations for

combined connection using the coupler (as shown below).

NVCOUPLER-34 NVCOUPLER-38

When one standard size NO-VAC

QUICK

CONNECT

LINE SET is not long enough,

two standard QUICK CONNECT

LINE

SETS can be combined using our NO-VAC

COUPLER to increase the desired length of

the QUICK CONNECT

LINE SETS.

MRCOOL

NO-VAC COUPLER

FOR THE UNIVERSAL QUICK-CONNECT

LINESET

PAGE 1
MRCOOL® NO-VAC COUPLER FOR THE UNIVERSAL QUICK-CONNECT® LINESET When one standard size NO-VAC® QUICK CONNECT® LINE SET is not long enough, two standard QUICK CONNECT® LINE SETS can be combined using our NO-VAC® COUPLER to increase the desired length of the QUICK CONNECT® LINE SETS. NVCOUPLER-34 NVCOUPLER-38 PLEASE READ CAREFULLY AND FOLLOW THE INSTRUCTIONS BELOW: 1 Select the No-VAC® QUICK CONNECT® LINE SET size to be lengthened (⅜ or ¾).
PAGE 2
Use a wrench to assemble the coupler with both F1 and F2 on the corresponding lineset. Make sure the thread is screwed to the bottom until it stops (as shown below). F1 3/8” F2 3/4” 3/8” 3/4” F1 3/8” F2 3/4” 3 After the connection is complete, cover the F1, F2, and coupler connections with the grey insulating sleeve to help prevent condensation (as shown below). 4 Slide the insulation sleeves together ensuring no copper wiring is exposed and secure in place using tape.