Specs

11
TESTED AHRI COMBINATION RATINGS
NOTE: Ratings contained in t his document are subject to change at any time.
For AHRI ratings certificates, please refer to the AHRI directory www.ahridirectory.org
Additional ratings and system combinations can be accessed via the P ayne database at: www.MyPayneRatings.com
UNIT SIZE --- SERIES
INDOOR
MODEL
AHRI STANDARD RATINGS
FURNACE MODEL
COOLING
CAP ACITY
FACTORY
ENHANCE
SEER
EER
STANDARD TDR TXV
0 1 8 --- A *CAP**1917AL* 17,500 TXV 14.00 11.70
0 2 4 --- A *CAP**2517AL* 23,400 TXV 14.00 11.70
0 3 0 --- A *CAP**3721AL* 29,600 TXV 14.50 12.00
0 3 6 --- A *CAP**3721AL* 34,200 TXV 14.00 12.00
0 4 2 --- A *CAP**4321AL* 38,500 TXV 14.00 12.00
0 4 8 --- A *CAP**6124AL* 45,000 TXV 14.50 11.70
0 6 0 --- A *CAP**6024AL* 56,500 TXV 14.00 11.70
AHRI — Air Conditioning, Heating & Refrigeration Institute
EER — Energy Efficiency Ratio --- 80_F (26.6_C) indoor db/67_F (19.4_C) indoor wb & 95_F(35_C) outdoor wb.
SEER — Seasonal Energy Efficiency Ratio
TDR — Time---Delay Relay. In most cases, only one method should be used to achieve TDR function. Using more than one method in a system may cause degradation in
performance.
Use either the accessory Time---Delay Relay, KAATD0101TDR, or a furnace equipped with TDR. Most Payne furnaces are equipped with TDR.
NOTES:
1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electric heat is not included.
2. Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for central a ir conditioners. Ratings for other combinations are determined under DOE
computer simulation procedures.
3. Determine actual CFM values obtainable for your system by referring to fan performance data in fan coil or furnace coil literature.
4. Do not apply with capillary tube coils as performance and reliability are significantly affected.
MRCOOL furnaces are equipped with TDR.