Cassette Remote Manual
Table Of Contents
- mrcool-olympus-cassette-Remote-Control-Manual-Covers
- mrcool-olympus-cassette-Remote-Control-Manual-P1P2
- mrcool-olympus-cassette-Remote-Control-Manual-P3P4
- mrcool-olympus-cassette-Remote-Control-Manual-P5P6
- mrcool-olympus-cassette-Remote-Control-Manual-P7P8
- mrcool-olympus-cassette-Remote-Control-Manual-P9P10
- mrcool-olympus-cassette-Remote-Control-Manual-P11P12
- mrcool-olympus-cassette-Remote-Control-Manual-P13P14
10
Dehumidifying operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts ashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 62
O
F~86
O
F in 1
O
F
increments.
3. Press the ON/OFF button to start the air
conditioner.
NOTE:
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically controlled.
1
3
2
MODE
FAN SPEED
M
AUTO
COOL
DRY
HEAT
FAN
F
TEMP.
SET
CLOCK
HOUR
9
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL, HEAT,
(cooling & heating models only) or FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature. The temperature can
be set within a range of 62
O
F~86
O
F in 1
O
F
increments.
3. Press the FAN SPEEDbutton to select the
fan speed in four steps- Auto, Low, Med,or
High.
4. Press the ON/OFF button to start the air
conditioner.
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not able
to control the room temperature either. In this case,
only step 1, 3 and 4 may be performed.
NOTE:
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts ashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
be set within a range of 62
O
F~86
O
F in 1
O
F
increments.
3. Press the ON/OFFbutton to start the air
conditioner.
1
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE:
3
2
3
2
MODE
FAN SPEED
M
AUTO
COOL
DRY
HEAT
FAN
F
TEMP.
SET
CLOCK
HOUR
1
4
AUTO
COOL
DRY
HEAT
FAN
F
TEMP.
SET
CLOCK
HOUR
MODE
FAN SPEED
M
® ®
For more info visit www.mrcool.com For more info visit www.mrcool.com