Cassette Remote Manual

Function buttons
1
2
Each time the button is pressed, the operation
mode is selected in a sequence of following:
3
MODE Button
4
3
4
ON/OFF Button
Operation starts when this button is pressed
and stops when this button is pressed again.
NOTE: Please do not select HEAT mode if the
machine you purchased is cooling only. Heat
mode is not supported by the cooling only
appliance.
AUTO COOL
DRY HEAT FAN
SLEEP Button
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if MODE, FAN
SPEED or ON/OFF button is pressed.
Active/Disable sleep function. It can maintain
the most comfortable temperature and save
energy. This function is available on COOL,
HEAT or AUTO mode only .
SWING V Button
Used to stop or start horizontal louver move-
ment or set the desired up/down air ow
direction. The louver changes 6 degree in
angle for each press. If keep pushing more
than 2 seconds, the louver will swing up and
down automatically.
MODE FAN SPEED
SWING V SLEEP
TIMER ON
TIMER OFF
CLOCK
RESET LOCK
M
AUTO
COOL
DRY
HEAT
FAN
4
5
7
8
9
10
11
12
13
14
15
2
1
TURBO
LED
Sliding door
(opened)
RG05F2/BGEU1
SWING H
16
5
SWING H Button
SELF CLEAN
6
I FEEL
Used to stop or start vertical louver movement
and set the desired left/right air ow direction.
The vertical louver changes 6 degree in angle
for each press. And the temperature display
area of indoor unit displays “ ” for one
second. If keep pushing more than 2 seconds,
the vertical louver swing feature will activate.
And the display area of indoor unit displays
“ “ , ashes four times, then the tempera-
ture setting reverts back. If the vertical louver
swing feature is stopped, it displays ”LC” and
remains on for 3 seconds.
NOTE: For some units, the indoor unit displays
“ON” when the swing feature is activated, and
displays “OF” when the swing feature is stopped.
IIII
Model
Rated Voltage
8m
3.0V(Dry batteries R03/LR03x2)
Remote Control Specifications
1. Operating Mode: AUTO, COOL, DRY, HEAT(cooling & heating models only),
and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 62
O
F~86
O
F(17
O
C~30
O
C).
4. Full function of LCD (Liquid Crystal Display).
Environment
Signal Receiving Range
Performance Feature
3
MODE FAN SPEED
M
AUTO
COOL
DRY
HEAT
FAN
Sliding door
(closed)
RG05F2/BGEU1, RG05F3/BGEFU1
23
O
F~140
O
F(-5
O
C~60
O
C)
NOTE:
Buttons design is based on typical
model and might be slightly dierent
from the actual one you purchased
the actual shape and layout may vary.
All the functions described are
accomplished by the unit. If the unit
has no this feature, there is no
corresponding operation happened
when press the relative button on the
remote control.
If there are any dierences between the
“Remote Control Manual” and “User Manual”
on function description, follow the
description in “User Manual”.
® ®
For more info visit www.mrcool.com For more info visit www.mrcool.com