Please read this manual carefully before installation and keep it for future reference. Owner & Installation Manual Bottled Water Cooler Model: MTWB05 Please read this manual carefully before installation and keep it for future reference. V04.09.
Contents 1 Product Summary .............................................................................2 2 General Information..........................................................................3 3 How to Install......................................................................................5 4 How to Use...........................................................................................6 5 Troubleshooting..........................................................................
Product Summary To Our Customers 1 Thank you for choosing the MRCOOL® Water Cooler. In order to use and maintain this product correctly, please read the manual carefully before using the product. Store the manual for future reference. (1) This is a vertical water dispenser, please place it on the ground firmly to avoid falling. (2) Operation conditions: Altitude: < 4921.26 Ft (1500m) (3) Check the product periodically for any connection leaks or any loose wires.
General Information Technical Parameters 2 Model Number MTWB05 Feed Water Municipal tap water Voltage and Frequency 110/220V, 50/60HZ Rated Power 665W Heating Power 500W Cooling Power 150W Water Production Power 15W Dimensions W - 1.3Ft (387mm) * D - 1.5Ft (462mm) * H - 4.5ft (1385mm) Recommended Locations •Offices •Clubs •Hotels •Airports •Train Stations •Factories •Many more 1.3ft (387mm) Function 4.5ft (1385mm) 3.
General Information Drain of Cold Water Tank mrcool.
How To Install Installation Procedures 3 (1) Tools Required: •Phillips (cross-tip) screw driver •Adjustable wrench •Scissors (2) Please review the Packing List previously mentioned and ensure all items are included in the packaging. (3) Installation Position Required: •Close to 220V /11 OV socket •Close to drain outlet, please note that the position of drain pipes should be at least 20cm lower than water pan, please refer to (7) of 3. (4) Connect the silicon tube to the drain of the water pan or a bucket.
How To Use How To Get Hot Water 4 1. Flip the heating switch on (switch position will be from "O" to "-".), the machine will start heating. 2. Press the hot water button on the control panel. After a short "Ding" sound, the hot water status is released and will last for 3 seconds. 3. Press the "water Outlet/ Ambient Water button" within 3 seconds and you will get hot water (a red circling light will appear around the "water outlet" button ). 4.
How to Use How To Get Cold Water 1. Press the Cooling switch on (switch position will be from "O" to "-”), the machine will start cooling. 2. Press the cold water button on the control panel. A "Ding” sound will signal the cold water status is released and will last for 3 seconds. 3. Press the "water Outlet/ Ambient Water button" within 3 seconds and you will get cold water (a blue light will circle around the "water outlet" button ). 4.
Troubleshooting mrcool.
Light Indicator Page 9 mrcool.
Bottled Water Cooler The design and specifications of this product and/or manual are subject to change without prior notice. Consult with the sales agency or manufacturer for details.
