18seer thermostat manual

Unitary Ducted Split AC
5
Fig. 7
4.5 “SET” (Parameters/Functions View and Setting)
It is available to go the parameters/functions view and setting page by pressing the “Set”
button, and then desired option can be selected by pressing the “▼/▲” button, nally go to the
corresponding view and setting page by pressing the “Enter/Hold” button.
Fig.8 Parameters/Functions View and Setting
4.5.1 “DEMAND”
After accessing to the “DEMAND” page, it is available to select the desired parameter by
pressing the “▼/▲” button.
The upper value indicates the desired parameter, while the lower value indicates the parameter
No.
Fig.9
Table 2
Parameter No. Parameter Description
01 Compressor Runtime
02 Opening Angle of the Electronic Expansion Valve
03 Outdoor Environment Temperature
04 Tube Inlet Temperature of the Outdoor Unit
05 Tube Midway Temperature of the Outdoor Unit
For more information visit www.mrcool.com.