18seer thermostat manual

Unitary Ducted Split AC

Fig.14

⑤

After the temperature under the cooling mode is set, press the “Enter/Hold” button to make

a conrmation and go to the setting status for setting the temperature under the heating mode and

adjust it through the ▲ or ▼ button.

Fig.15

⑥

After that, press the “Enter/Hold” button to make a conrmation and go back to the page

shown in step

②

and then repeat the steps

②

～

⑤

for setting other time periods.

Fig.16

⑦

After the fourth time period is set, then all parameters of these four time periods will be

saved and then back to the page for selecting the days of the week. Then, it is available to continue

the setting on other days in the same way.

Fig.17

For more information visit www.mrcool.com.