MRCOOL 13SEER R410A Brochure

7
Product Specifications
MODEL MAH13018 MAH13024 MAH13030 MAH13036 MAH13042 MAH13048 MAH13060
Nominal Ratings
Nominal Cooling (Btu/h) 18000 24000 30000 36000 42000 48000 60000
CFM 640 825 980 1140 1300 1400 1650
Rated ESP (in-wc) 0.10 0.10 0.15 0.15 0.15 0.20 0.20
Blower
Diameter (inch) 10 10 10 10 10 10 11
Width (inch) 8 8 8 10 10 10 11
Coil Drain Connection FPT
(inch)
3/4”’
Service Valve
Liquid pipe diameter (inch) 3/8’’ 3/8’’ 3/8’’ 3/8’’ 3/8’’ 3/8’’ 1/2’’
Suction pipe diameter (inch) 5/8’’ 5/8’’ 3/4’’ 3/4’’ 7/8’’ 7/8’’ 1-1/8’’
Electrical Data
Power Supply (V-Hz-Ph) 208/230-60-1
Min. Circuit Ampacity (A) 0.78 1.9 1.6 2.5 2.5 3.1 5.75
Max.Overcurrent Device (A) 15
Minimum VAC (V) 187
Maximum VAC (V) 254
Blower Motor
FLA 0.62 1.52 1.25 2.00 2.00 2.50 4.6
Power output (HP) 1/16 1/5 1/4 1/3 1/3 1/2 3/4
Dimension
Outline Dimension (W/D/H)
(inch)
18
1/8 / 21 1/4
/ 43 1/2
18 1/8 / 21 1/4
/ 43 1/2
18 1/8 / 21 1/4
/ 43 1/2
21 1/4 / 21 1/4
/ 48 1/4
21 1/4 / 21 1/4
/ 48 1/4
24 7/8 / 21 1/4
/ 48 1/4
24 7/8 / 21 1/4
/ 48 1/4
Package Dimension
(W/D/H) (inch)
20 3/8 / 24 3/8
/ 46
20 3/8 / 24 3/8
/ 46
20 3/8 / 24 3/8
/ 46
23 1/2 / 24 3/8
/ 50 3/4
23 1/2 / 24 3/8
/ 50 3/4
27 / 24 3/8
/ 51
27 / 24 3/8
/ 51
Weight
Net Weight (lb) 114.7 116.9 122.4 143.3 1 4 7. 7 174.2 176.4
Gross Weight (lb) 124.6 125.7 130.1 154.4 158.8 185.2 189.6
Mr Cool Air Handler
Due to continuous product improvement, the specifications listed below are subject to change without notice, and the
values shown on product nameplates should be referred to as final.
For more details visit www.mrcool.com