mrcool 13seer r410 cond install manual 4web

Unitary Ducted Split AC & HP

42-60k Circuit Diagram

Model:MHP13042; MHP13048; MHP13060.

Fig.24

8. System Refrigerant

This section outlines procedures for:

● Connecting gauge set for testing and charging.

● Adding or removing refrigerant.

8.1 Gauge Set (Cooling Only)

Connections for testing and charging.

A Close manifold gauge set valves and connect the center hose to a cylinder of HFC−410A.

Set for liquid phase charging.

B Connect the manifold gauge set’s low pressure side to the suction line service port.

C Connect the manifold gauge set’s high pressure side to the liquid line service port.

D Position temperature sensor on vapor line near liquid line service port.

For more details visit www.MrCool.com